Indoor P2.5 Shaped LED Screen Project in Las Vegas, USA

Project Location: Las Vegas, USA
Product: Indoor P2.5 Shaped LED Screen
Installation Height: 7.3 m
Pixel Pitch: P2.5
Refresh Rate: ≥7680Hz
Input Voltage: AC 90–264V
Output Voltage: DC 5V
Application: Commercial Atrium / Exhibition Space / Creative Digital Installation
Installation Type: Custom-Shaped Indoor LED Display

A 7.3-Meter Creative LED Installation in Las Vegas

Las Vegas is known for large-scale visual experiences, creative architecture, and eye-catching digital displays. For this indoor project in Las Vegas, USA, the customer wanted more than a conventional rectangular LED wall.

The goal was to create a 7.3-meter-high shaped LED screen that could become the visual center of the entire indoor space.

Instead of placing a flat display against a wall, the LED structure was designed vertically, extending from the floor toward the ceiling. The upper section expands outward to create a tree-like canopy, while the main LED body forms a tall curved trunk.

This design turns the display itself into part of the interior architecture.

Why P2.5 Was Selected for This Indoor Shaped LED Screen

For a large indoor installation, the viewing distance can change significantly. Some visitors may see the display from several meters away, while others can walk relatively close to the LED surface.

For this reason, the project uses an indoor P2.5 shaped LED screen.

The 2.5 mm pixel pitch provides enough image detail for high-resolution nature videos, animations, branding content, and immersive visual effects while remaining practical for a 7.3-meter installation.

Compared with a larger pixel pitch, P2.5 helps keep branches, leaves, flowers, textures, and other detailed content visually clear when viewed from different positions inside the building.

Custom Structure for a Non-Standard LED Shape

The biggest challenge in this project was not simply installing LED modules. It was making different sections of the screen connect naturally.

A shaped LED display like this contains several different surfaces. The lower part gradually becomes narrower, the vertical section changes curvature, and the top expands into a wide circular structure.

Standard rectangular LED cabinets cannot easily create these transitions.

Therefore, the mechanical structure must be customized according to the final 3D shape.

Flexible or specially designed LED modules can be positioned along the curved surface, while a custom metal frame keeps the overall structure stable.

Careful alignment is especially important around transition areas. If the modules are not positioned correctly, visible gaps, uneven curves, or distorted images may appear.

Continuous Content From the Bottom to the Ceiling

One of the strongest visual features of this project is the continuous digital content.

Forest scenes, plants, flowers, tree textures, and animated details can move from the lower section upward through the 7.3-meter screen.

The content then continues into the wider ceiling section, creating the impression that the digital tree is growing directly into the building.

This type of content design is particularly suitable for shaped LED screens because it uses the physical form of the display rather than treating the screen as a conventional video wall.

When the screen structure and video content are designed together, the final installation becomes much more immersive.

≥7680Hz Refresh Rate for Smooth Visual Performance

The display is configured with a refresh rate of at least 7680Hz.

A high refresh rate is important for commercial spaces where visitors frequently take photos and videos with smartphones or professional cameras.

A low-refresh LED screen may produce scanning lines, flickering, or dark bands when recorded.

With a refresh rate of ≥7680Hz, the shaped LED screen provides smoother visual playback and better camera performance, making it suitable for exhibitions, shopping centers, entertainment venues, brand spaces, and high-end commercial interiors.

Power Configuration

The electrical system for this project uses:

• Input: AC 90–264V
• Output: DC 5V

The wide input voltage range makes the system suitable for different power environments.

For a tall customized LED installation, power distribution should also be planned carefully. Different sections of the screen need balanced power loading, reliable cable routing, proper grounding, and accessible maintenance points.

This is especially important for a 7.3-meter structure because maintenance becomes more difficult if power supplies or control components are placed in inaccessible locations.

Factory Testing Before Installation

Before shipment, a custom-shaped LED screen should be assembled and tested as much as possible at the factory.

For this Las Vegas project, important checks include module alignment, structural dimensions, color consistency, image mapping, power distribution, signal transmission, and long-duration display testing.

The engineering team also needs to confirm that the video content transitions correctly between the narrow vertical section and the wider upper structure.

Testing before delivery helps reduce adjustment time on site and lowers the risk of unexpected installation problems.

A Digital Landmark Inside the Building

After installation, the shaped LED screen becomes more than a display device.

Its 7.3-meter height gives it a strong architectural presence, while the P2.5 LED surface allows the client to continuously change the visual theme.

Nature content can create a relaxing digital environment. Brand graphics can transform the installation into a commercial advertising feature. Seasonal animations can also be updated without changing the physical structure.

This flexibility is one of the major advantages of using a creative LED display instead of a permanent decorative installation.

Project Specification

Why Choose TOOSEN for Custom-Shaped LED Projects?

Founded in 2014, Shenzhen Toosen Optoelectronics Co., Ltd. focuses on standard and creative LED display solutions for commercial, exhibition, entertainment, retail, and architectural projects.

For shaped LED projects, our team can support customers from the early design stage through structural planning, LED module selection, control-system configuration, factory assembly, testing, packaging, and installation guidance.

Whether the project requires a tree-shaped LED screen, spherical LED display, cylinder LED screen, curved LED wall, bottle-shaped display, or another customized structure, the design must consider not only appearance but also pixel layout, structural strength, heat dissipation, signal transmission, power distribution, and future maintenance.

For projects like this P2.5 indoor shaped LED screen in Las Vegas, the goal is not simply to build an unusual shape. It is to make the display stable, visually

Contact TOOSEN

TOOSEN can provide customized sphere diameter, pixel pitch, installation structure and control solutions according to your indoor space and viewing distance.

TOOSEN LED Official Website：https://www.toosenled.com/